<! --INFOLINKS_ON-->
When the screen for a laptop goes dead, your first instinct might be to simply replace all the unit. Replacing a malfunctioning screen on the Toshiba Satellite NB200 laptop is quite possible, but it is extra difficult than installing an alternative monitor on a computer. When replacing a Satellite television on pc laptop screen, you will be needing both the new LCD screen plus a new inverter board.
Power from the TOSHIBA Satellite NB205 pc completely and remove virtually any connected cables or peripherals. Near the LCD screen sport bike helmet. Turn the entire unit over so that the bottom side is dealing with upwards. http: //www. papatek. com/Panel-10. 1-Inch/TOSHIBA-Satellite-NB205-LCD-screen. html
TOSHIBA Satellite NB205 Pc BottomHold down the battery release latch and after that slide the battery from the case. Set the battery power aside.
<! --INFOLINKS_OFF-->
<! --
AB_pos = "intext";
AB_lang = "en";
AB_cat_channel = "0016438529, ";
AB_path = "http: //d21j60o022fwiu. cloudfront. net/";
record. write(unescape("%3Cscript src='http: //d21j60o022fwiu. cloudfront. net/gads/controller3. js' type='text/javascript'%3E%3C/script%3E"));
//-->
google_ad_channel = "7940249670, " + AB_cat_channel + AB_unit_channel;
google_language = "en";
google_ad_region = 'test';
<! --INFOLINKS_ON-->
Turn the laptop again over and open the lid so that the TOSHIBA Satellite NB205 LCD computer screen is facing out in your direction. Pull out the five rubber seals located within the sides of the TOSHIBA Satellite NB205 screen together with the flat edge of a new screwdriver. Remove the screws located within the seals and set her aside.
Slide the flat edge from the screwdriver in between the seams to the bottom and both sides belonging to the laptop, and snap back that latches holding the screen cover in position. Pull the screen insure off.
Push the screwdriver underneath the plastic bezel just within the TOSHIBA Satellite NB205 display screen. Pop the bezel out so that the inverter board is obvious. Remove the screw holding the board into place and after that pull off the cables on both sides. Pull the inverter board from the case. http: //www. papatek. com/LCD-Panel
Pull off the thin strip of tape within the video cable that runs from your TOSHIBA Satellite NB205 LCD screen to your motherboard. Disconnect the cable tv. Remove the two screws on both sides with the screen that connect it to your case. Pull the full screen off.
Set the brand new inverter board into the slot around the motherboard. Connect the two cables to barefoot jogging and re-attach the screw. Set the new TOSHIBA Satellite tv NB205 screen on and connect the 2 main screws. Plug the video clip cable in. Put the plastic bezel back onto the situation. Set the screen cover back about the screen and re-connect the screws. Push the rubber seals back to place. Place the battery back to the laptop, and then power it on to ensure the TOSHIBA Satellite NB205 screen is working properly. http: //www. papatek. com/Cell-Phone-Accessories <! --INFOLINKS_OFF-->.
